Name: Dupla Osmosis System
SKU: 37293-1
Availability: InStock

The Dupla Osmosis System not only creates an optimal starting water for marine and freshwater aquariums. It also solves the problems with sprinkler systems in terrariums. Limescale often clogs the sprinkler nozzles and makes for increased maintenance of the nozzles. Rainforest plants also react very sensitively to lime. In addition, the unsightly lime stains on the glass panes destroy the rainforest feeling.

Often, many water problems can only be solved by using Dupla Osmosis System. Reverse osmosis systems work according to the principle of physical filtration. In a reverse osmosis system, pollutants (e.g. silicate, nitrate) and hardness components such as lime are physically removed from the water. In the reverse osmosis system, the water flows through a semi-permeable membrane at the pressure of 2 – max. 6 bar found in standard household water pipes. The substances dissolved in the water (pollutants, salts or lime) cannot pass through the small grid structure of the membrane and remain in the residual water. This residual water is discharged as a concentrate and can be used without hesitation as cleaning or utility water. The Dupla Osmosis System has a maximum retention rate of 95 – 98 % of all pollutants in tap water.

Scope of delivery RO 200:

RO 200 completely assembled with sedimet filter (5 µm fine filter), carbon filter and membrane

3 x 2 m hose

3/4 inch water tap connection

Flow limiter with integrated flush valve

Connecting clips for pre-filter and membrane housing

Wall bracket

Hose plug

Housing key for membrane housing

Operating instructions

Technical data:

Max. Output 200 l / day, depending on the quality of the source water

Average capacity 120 – 200 l / day at 8 – 15° C and 3 – 5 bar pressure

Average retention rate 95 – 98

Aluminium 97 – 98 %

Cadmium 95 – 98 %

Bacteria 99 %

Nitrates max. 90 %

Silicates max. 90 %Sulphates 97 – 98 %

Hardness components 95 – 98 %

Ratio of concentrate: 4 : 1 / 3 : 1 depending on the quality and pressure of the source water.

Scope of delivery RO 300:

RO 300 completely assembled with sediment filter (5 µm fine filter), carbon filter and membrane

3 x 2 m hose

3/4 inch water tap connection

Flow limiter with integrated flush valve

Wall bracket

Hose plug

Housing key for filter and membrane housing

Operating instructions

Technical data:

Max. Capacity 300 l / day, depending on the quality of the source water

Average capacity 220 -300 l / day at 8 – 15° C and 3 – 6 bar pressure

Average retention rate 95 – 98

Aluminium 97 – 98 %

Cadmium 95 – 98 %

Bacteria 99 %

Nitrates max. 90 %

Silicates max. 90

Sulphates 97 – 98 %

Hardness components 95 – 98 %

Ratio of concentrate: 4 : 1 / 3 : 1 depending on the quality and pressure of the source water.

Scope of delivery RO 600:

RO 600 assembled ready for use with sediment filter (5 µm fine filter), carbon filter, membrane and ultrapure water filter.

PWT (digital Pure Water Tester) ultra pure water tester

3 x 2 m hose

3/4 inch tap connection

Flow limiter with integrated flush valve

Wall bracket

Hose plug

Housing key for filter and membrane housing

Operating instructions

Technical data:

Capacity approx. 600 l / day, depending on the quality and pressure of the source water.

Average capacity: 500 – 650 l / day at 8 – 15° C and 3 – 6 bar pressure

The average retention rate of the membrane is 90 – 98 %.

Aluminium 97 – 98 %

Cadmium 95 – 98 %

Bacteria 99 %

Nitrates max. 90

Silicates max. 90

Sulphates 97 – 98 %

Hardness components 95 – 98

Through the additional ultra-pure water filtration, the remaining pollutants in the permeate are reduced by another 99 %. The initial value measured via the PWT (Pure Water Tester) should be 000 ppm when a new

000 ppm when using a new ultrapure water resin.

Ratio of concentrate: 1 : 1 depending on the quality and pressure of the initial water.

Perfect in combination with:

-21%

Weight	2400 g
Version	RO 200, RO 300, RO 600