Ultrapure water tester PWT

Ultrapure water tester PWT – Precise control of your water quality

The ultrapure water tester PWT (Pure Water Tester) is a practical measuring device for quickly checking water quality. This is a TDS meterwhich measures the level of dissolved substances in the water. This allows you to easily check how clean your osmosis water actually is.

The device is particularly suitable for qualitative determination of the permeate of reverse osmosis systems. At the same time, the tester can also be used to check the performance of ultrapure water filters or mixed bed resins to be controlled.

It is particularly easy to use. You press the Power buttonand the current measured value is displayed immediately. The tester then measures for approx. three minutes the passing value in ppm. This gives you a quick and reliable overview of the water quality.

An increasing measured value may indicate that a membrane membrane or filter should be replaced. Even exhausted Mixed bed resins or ultrapure water filters can be detected at an early stage. This allows you to react in good time and replace the filter elements.

The ultrapure water tester PWT can be used in two different ways. You can use it Hold directly in the water to be measuredto carry out a quick check. Alternatively, you can also Connect permanently to a reverse osmosis system.

For this purpose, a suitable suitable T-connection is suppliedwhich can be connected to all common osmosis systems with 4/6 mm hose connection can be connected. This means you can easily retrofit the device and integrate it permanently into your system.

With the Dupla RO 600 osmosis system the ultrapure water tester PWT is already included in the scope of delivery. This allows you to check the water quality right from the start.

With the ultrapure water tester PWT you can keep track of the performance of your osmosis system at all times and ensure that your water reaches the desired purity.