Sale!

Dupla osmosis system

incl. VAT, plus shipping

Category: Lighting & climate

SKU: 80545

More information

TypeRO 200 RO 300 RO 600

g6000

The Dupla osmosis system not only creates an optimal starting water for marine and freshwater aquariums. It also solves problems with irrigation systems in terrariums. Limescale often clogs the irrigation nozzles and requires increased maintenance of the nozzles. Rainforest plants are also very sensitive to lime. In addition, the unsightly limescale stains on the glass panes destroy the rainforest feeling.

Many water problems can often only be solved by using Dupla osmosis systems. Reverse osmosis systems work according to the principle of physical filtration. In a reverse osmosis system, pollutants (e.g. silicate, nitrate) and hardness formers such as lime are physically removed from the water. In the reverse osmosis system, the water flows through a semi-permeable membrane under the pressure of 2 – max. 6 bar found in standard household water pipes. The substances dissolved in the water (pollutants, salts or limescale) cannot pass through the small grid structure of the membrane and remain in the residual water. This residual water is discharged as a concentrate and can be used without hesitation as cleaning or service water. The Dupla osmosis system has a maximum retention rate of 95 – 98 % of all pollutants in tap water.

RO 200 fully assembled with sediment filter (5 µm fine filter), carbon filter and membrane
3 x 2 m hose
3/4 inch tap connection
Flow rate limiter with integrated flush valve
Connection clamps for pre-filter and membrane housing
Wall bracket
Hose plug
Housing wrench for membrane housing
Operating instructions

Technical data:

Max. Capacity 200 l / day, depending on the quality of the source water
Average capacity 120 – 200 l / day at 8 – 15° C and 3 – 5 bar pressure
Average retention rate 95 – 98 %
Aluminum 97 – 98 %
Cadmium 95 – 98 %
Bacteria 99 %
Nitrates max. 90 %
Silicates max. 90 %Sulphates 97 – 98 %
Hardness constituents 95 – 98 %

Concentrate ratio: 4 : 1 / 3 : 1 depending on the quality and pressure of the source water.

RO 300 fully assembled with sediment filter (5 µm fine filter), carbon filter and membrane
3 x 2 m hose
3/4 inch tap connection
Flow rate limiter with integrated flush valve
Wall bracket
Hose plug
Housing wrench for filter and membrane housing
Operating instructions

Technical data:

Max. Output 300 l / day, depending on the quality of the source water
Average output 220 -300 l / day at 8 – 15° C and 3 – 6 bar pressure
Average retention rate 95 – 98 %
Aluminum 97 – 98 %
Cadmium 95 – 98 %
Bacteria 99 %
Nitrates max. 90 %
Silicates max. 90 %
Sulphates 97 – 98 %
Hardness constituents 95 – 98 %

Concentrate ratio: 4 : 1 / 3 : 1 depending on the quality and pressure of the source water.

RO 600 ready for use assembled with sediment filter (5 µm fine filter), carbon filter, membrane and ultrapure water filter
PWT (digital pure water tester) ultrapure water tester
3 x 2 m hose
3/4 inch tap connection
Flow rate limiter with integrated flush valve
Wall bracket
Hose plug
Housing key for filter and membrane housing
Operating instructions

Technical data:

Capacity approx. 600 l / day, depending on the quality and pressure of the source water
Average capacity: 500 – 650 l / day at 8 – 15° C and 3 – 6 bar pressure
The average retention rate of the membrane is 90 – 98 %
Aluminum 97 – 98 %
Cadmium 95 – 98 %
Bacteria 99 %
Nitrates max. 90 %
Silicates max. 90 %
Sulphates 97 – 98 %
Hardness constituents 95 – 98 %
The additional ultrapure water filtration reduces the remaining pollutants in the permeate by a further 99 %. The initial value measured using the PWT (Pure Water Tester) should be 000 ppm when using a new
ultrapure water resin.